Shopping Cart
The best AUDI SEAT SKODA VW 1.8 / 2.0 TSI (MQB) performance intercooler pipe kit on the market!
This kit is for you with significant horsepower goals that want to upgrade to the absolute best!
Our pressure pipe has considerably better airflow than the stock pipe. This has been verified in several tests, both in car and in our own SuperFlow SF-1020 flow bench.
Advantages with do88 pressure pipes (OEM pipes):
- Air flow at 0,1bar/1,45psi pressure drop: 364CFM (280CFM), do88 30% higher!
- Designed to handle high pressure and temperatures!
- The pipe has one methanol injection connection (1/8 -27 NPT). The pipe is delivered with blanking plug in this connection.
The pressure pipe is manufactured in 63mm (2,5”) mandrel bent seamless aluminium pipe.
Custom made high quality silicone hose with 4 layers of polyester/aramid reinforcement. These hose can handle very high temperature and pressure!
Always remember that the OEM intercooler pipes and hoses was designed for the power level the car was built for and a power increase or even very hard use of the car in a standard version may cause that the OEM pipes and hoses don’t have the performance you need. So only after engine software tune do88 pressure pipes will give a performance increase over the OEM pipes!
Do88 pressure pipes comes with all hardware necessary for installation.
FITS MODELS:
VW Golf (MK7, MK7.5)
Model years: 2013-
Model: GTI, R, Clubsport, ED40, Golf, Sportwagen
Engine: 1.8 TSI, 2.0 TSI
VW Passat (3G)
Model years: 2015-
Engine: 1.8 / 2.0 TSI
VW Tiguan (MK2)
Model years: 2016-
Engine: 2.0 TSI
Note! The hot side hose must be shortened towards the pressure hose. Tight fit!
VW Arteon
Model years: 2017-
Engine: 2.0 TSI
VW Jetta GLI (MK7)
Model years: 2019-
Engine: 2.0 TSI
Audi A3 / S3 (8V)
Model years: 2012-
Engine: 1.8 TFSI, 2.0 TFSI
Note! The plastic radiator/intercooler support frame will need trimming / modifications!
Click here to read the trimming instructions.
Audi TT / TTS (8S)
Model years: 2015-
Engine: 1.8 TFSI, 2.0 TFSI
Note! The plastic radiator/intercooler support frame will need trimming / modifications!
SEAT León / Cupra (MK3)
Model years: 2013-
Engine: 1.8 TSI, 2.0 TSI
Note! The plastic radiator/intercooler support frame will need trimming / modifications!
Click here to read the trimming instructions.
SEAT Ateca / Cupra (MK1)
Model years: 2016-
Engine: 1.8 TSI, 2.0 TSI
Note! The plastic radiator/intercooler support frame will need trimming / modifications!
Skoda Octavia / VRS (MK3)
Model years: 2013-
Engine: 1.8 TSI, 2.0 TSI
Note! The plastic radiator/intercooler support frame will need trimming / modifications!
Skoda Superb (B8)
Model years: 2015-
Engine: 1.8 TSI, 2.0 TSI
Tap to zoom
